Garrett Infinium is a pulsed induction metal detector and is very different from the standard VLF machine, which is more common and abundant in this industry. A unique feature is that it ignores most of the iron minerals it encounters. Just the fact that impulse induction has this ability will already make you get ahead of the game when you are looking for gold nuggets.
A standard VLF (very low frequency) detector, even built for gold deposits, can be very noisy in dirt contaminated with hot iron, even if it has aggressive ground tracking circuits. When I started using Infinium to hunt for nuggets, I noticed a huge difference in my ability to mentally process detection for a longer time, because my ears were no longer exposed to ground noise through my headphones. The ability to detect longer also increased my chances of putting some kind of gold that my detector would sound like.
I found one day for 6 hours before I came across a 1/4 ounce gold nugget. My body was tired when I raised a couple of miles working on my car. But my ears and my mind were still holding, hearing only a pleasant threshold tone, which almost never faltered until it came across a piece of metal. It was refreshing, as my transition to pulsed induction seemed to pay off.
My Infinium processed every bit of hot, nasty iron contaminated earth mineralization that I encountered. These extreme minerals are so influenced by VLF machines that you may not hear the nugget under the coil, because it may just be noise on the ground, or it may be a desirable goal. It is difficult to discern a lot of beeps coming to you in headphones. This can be done with many hours of practice, but the pulsed induction detector shortens the training time a bit, so you can focus on the terrain and look for gold.
Infinium LS (land and sea), equipped with mono-coils, still handled hot mud very well, and I rarely needed to remove them and switch back the DD coils, which process the hard surface even better, but slightly less sensitive to smaller gold nuggets When I used the DD coils, it was intended to check inside the old shaft for ore veins or small pockets of gold left by the miners who actually pulled out the tunnels.
This machine is very powerful and has great depth on objects, starting at about one gram. Gold, smaller than this, is still detected, but the depth is lost, because the objects are very small. My smallest piece of gold was 3 grams by 1.5 inches, and another piece weighing 4 grams at a depth of 2 inches. As you can see, Infinium will collect tiny nuggets, but other manufacturers of metal detectors, such as Minelab, have several pulsed induction machines that will collect subgraphs from gold and other low-wire objects. But you pay $ 5,000 for these cars. If you are on a budget, this is the detector for you.
I paid about $ 1,000 for my Garrett Infinium, and I paid for it with gold nuggets from Northern California for 3 months. I would have to say that if I had to give a percentage of my chances of finding these rare minerals in nature, switching to pulsed induction and, in particular, Infinium, then I say that you have a 50% -70% VLF machine in search of gold nuggets.
Garrett Infinium - one hit for the dollar, using it for electronic intelligence. Gold is usually found with a large amount of iron near or around it in its matrix. Using this machine will help you find it easier in your alluvial and evuvial form, and even if you come across it in its natural state, for example, in your pocket or veins, this machine will sniff it out.
